Wednesday 2 September 2015

A little something extra - a finish & a Giveaway


Did I tell you I broke my machine?  My Husqvarna Viking H600e is a sewing machine with an embroidery module.  Its essentially the same as the Singer Futura XL550 sewing machine that has slightly fancier plastic but with Husqvarna software for the embroidery motifs.  To say that this is a finicky machine is an understatement!


My machine is unnamed; I generally don't name electric items.  At one point I was tempted to call her Heidi the Husky but Hideous Heidi kept popping into my head so often it was better she stay the unnamed one!


Don't let the pretty plastic fool you (she really is a good looking machine though, isn't she?) She can straight stitch with the best of them but ask her to do the fancy work she looks like she is up for, trouble brews. I have cursed more and muttered more and walked away from the machine in a temper more than any other piece of equipment I have ever owned - thanks Unnamed One for that!


The trouble is she really wants to be an embroidery machine and I kept wanting her to be the all purpose sewing /quilting/embroidery machine I thought I had bought.  I have since learned one size  does not fit all. 

Coats on left and Aurifil on right - same 50 weight
Image from Wonder thread Guide
She hates working at full speed (3/4 suits best).

She only likes expensive thread.  Gutermann for embroidery and Aurifil for quilting.

She doesn't like thread fed on the horizontal spool even when using the net so I use a doohickey called a Wonder Thread Guide.

This sits on top of where your spool goes and guides the thread through like a cone stand.  It's designed to eliminate thread breakage when stitching out an embroidery motif.  I leave it on the machine permanently.  It helps but I still get thread breakage, even with the expensive thread and new needles.  Happens mostly when the machine is travelling from one area in the hoop to another.

You get the best value in shipping by buying 2 so I have a spare one if anyone is having issues with thread and wants to try it.  Leave me a comment to enter the giveaway and if there is more than one person who wants this I'll do a random number generator to pick a winner.

Don't get me wrong there is a lot to like about this machine.  It has an automatic bobbin winder, push the lever and she winds herself!  She warns you when you are about to run out of bobbin thread - so handy!  She has a beautiful wide bed and a lovely wide harp space so moving  a quilt around is really easy.  The automatic needle threader is easy to use and works about 80% of the time but the little handle on the side of the machine keeps falling off so useless really! 

The real issue with this machine though, in my humble opinion, after 3 years working with it is this. 


The bobbin tension is a nightmare!  The manual says do not adjust the bobbin and of course I did!  In my defence I had to to get the tension right for free motion quilting (previous post here).  It was working like a dream for about 10 hours and then I guess the bobbin slowly came apart as it got worse and worse.  I did get my quilt finished but ended up with a broken bobbin case at the end.

28 Euro's later - a new bobbin case, some new Gutermann thread and voila!  A perfectly pretty Tula Pink owl all stitched out!


Was this a pain free experience with The Unanamed One?

Nope!  7 thread breaks, a bit of pulling in despite stabiliser and screwing the hoop as tight as I could, 1 curse after first attempt had a massive bobbin jam (jam proof drop in bobbin me a**e) - this came after round 10 of 16 and had to be discarded due to enormous hole ripped when trying to remove said jam proof bobbin, 2 cups of tea to calm down, 3 biscuits as I thought I deserved them after that, and 5 hours later - 1 owl!

It became a needle book (slightly largeish as the owl is about 5" x 8") as an extra to our Summer Tote bag Swap with the Modern Quilters Ireland.  I'm looking forward to sharing my bag with you this Friday as it should be delivered to my swap partner then!


The owl is available from Urban Threads along with the Acacia raccoon and can be bought in a machine or hand embroidery option.


I think it was worth the aggravation but I might just take a break and  do some quilting on my new Janome before sitting back down to The Unnamed One again for a bit just yet!

16 comments:

  1. I am glad you were able to stick with it and get the owl and project done - it is beautiful! I would probably need to take a break from the machine, too.

    ReplyDelete
  2. Are you using embroidery thread for your embroidery? The designs are dizitized for a fine thread. The needle thread tension needs to be backed off to a bit above 0 tension. Also, a heavier stabilizer would eliminate the pulling around your embroider. Will your dealer help you?
    When you look at the back of your embroidery, you should basically be seeing your upper thread color along the outer thirds of your stitching. Hope this helps!

    ReplyDelete
    Replies
    1. Hi Sharon yes using Gutermann embroidery thread - very light, it's rayon. Using Schmetz embroidery needles and 2 layers of stitch n tear stabiliser in the hoop. Tension is automatic on my machine when its in embroidery mode and yes the back does look like you describe. Thread breaks most when the needle travels to the next section!

      Delete
  3. I never had a computerized can do everything machine but I feel your pain. Liquid silicon called sewers aid can help therads to run smoothly. Did you change the direction of thread going to spool? Sometime wrong way does better. Some says stand alone spool stand with tall hook helps because it gives more time for threads to relax.
    It's very deep if you start looking at...

    ReplyDelete
  4. Wow...that's a lot of trouble. Hope things start to get better for you.

    ReplyDelete
  5. Have you tried to get help from your dealer? Is machine still under warranty? Sounds like a tech needs to make an adjustment. I feel bad you are having issues!

    ReplyDelete
  6. I just read that you are hooping really tight. Try looser. Loosen hoop screw just to the point where you can push the frame together with both hands and using a bit of effort. Don't tighten more. you might also try floating your stabilizer under the hoop...in other words don't hoop the stabilizer. there might be a Yahoo user group for your machine and they offer tons of good advice.i Good luck getting this sorted out!

    ReplyDelete
    Replies
    1. Thanks Sharon, your a star! Appreciate the advice and I'll give that a go!

      Delete
  7. Oh my goodness, sounds like a nightmare. So sorry, but the owl is unbelievable - so definitely worth it in the end xx

    ReplyDelete
  8. Sorry you are having trouble with your good-looking but temperamental machine, but the work you produced when it all worked is amazing!

    ReplyDelete
  9. Husqvarnas are crap at tension, ask me how I know :( I find I have to NOT use a cone stand when quilting or it goes rubbish (fine for piecing) but maybe your little gadget would be better, so please enter me in the draw :)

    ReplyDelete
  10. I don't want to enter the giveaway as i'm getting a fancy new Janime soon, but i wanted to say i've had no end of problems with my husqvarna. Biggest problems were with bobbin tension and one bibbin case broke without me even fiddling with it!

    ReplyDelete
  11. I don't want to enter the giveaway as i'm getting a fancy new Janime soon, but i wanted to say i've had no end of problems with my husqvarna. Biggest problems were with bobbin tension and one bibbin case broke without me even fiddling with it!

    ReplyDelete
  12. I don't want to enter the giveaway as i'm getting a fancy new Janime soon, but i wanted to say i've had no end of problems with my husqvarna. Biggest problems were with bobbin tension and one bibbin case broke without me even fiddling with it!

    ReplyDelete
  13. Wow, I am sorry you had so much trouble with your machine. The finished owl is lovely.

    ReplyDelete
  14. It seems you are very persistent!

    ReplyDelete

Comments are most welcome! I reply by email or within the thread if you are a noreply blogger so check back. Thanks.

Related Posts Plugin for WordPress, Blogger...